The four stages of the die-casting process can be mainly be divided into preparation, filling, injection and blanking

The most important thing before the die-casting process is to make preparations. The so-called sharpening the knife does not waste the woodcutter. During the preparation work, be sure to inject lubricant into the mold cavity and then close the mold and fill the prepared alloy raw materials into the die-casting process. In the mold, the high-pressure filling speed is very fast. Pay attention to the pressure here, which is about 10-70 megabytes;

After the heating is completed, the pressure is maintained to directly press the casting. Since a mold may have multiple cavities, there may be multiple castings. Finally, blanking is performed to separate the die castings from the residue, including the mold, nozzle, and fly. side and gate. In fact, if the process is detailed, the manufacturing process steps of die casting are far more than these few.